Professional Monitoring for any Studio The BX5 Carbon studio monitor helps you track, monitor, and mix with confidence by providing accurate sound and dynamic acoustic control. Equipped with a 5" woven Kevlar low-frequency driver and 1" natural silk dome tweeter, the BX5 Carbon delivers a flat frequency response, enhanced stereo imaging, and increased clarity for authentic mixing in a space-saving design. The bi-amplified 80 Watt Class A/B amplification means high power with less noise and ensures that your monitoring setup can handle today's modern music with ease. With the BX5 Carbon, your music is ready for any listening environment. Sweeter Sweet Spot The tweeter's waveguide has been enhanced to provide an expansive sweet spot and superior stereo imaging. A wider mix position gives you professional monitoring for any caliber studio. Pinhole-mounted LED placement cues help locate and light up the sweet spot to ensure a speaker placement that reliably translates stereo information and frequencies. When the LEDs turn bright, you know you're dead center and ready to start mixing your sessions or laying down tracks with the BX5 Carbon. Acoustic Control Mixing doesn't occur in a vacuum. Your listening environment influences your mixing decisions and, ultimately, the sound of your music. The BX5 Carbon's Acoustic Space Control, a series of calibration switches, helps provide optimal acoustic conditions for tracking, mixing, and monitoring anywhere. Adapt the BX5 Carbon to any mixing environment - from bedrooms to basements to professional studios - without compromising frequency detail or stereo image. The result is a flexible monitoring setup for the most demanding mixing environments. Product Specifications: Type: 2-way near-field studio reference monitors LF Driver: 5-inch (127 mm) Kevlar curved cone with high temperature voicecoil and damped rubber surround. Magnetically shielded HF Driver: 1-inch (25 mm) magnetically shielded natural silk dome Frequency Response: 56 Hz - 22 kHz Crossover Frequency: 2.8 kHz LF Amplifier Power: 40 W HF Amplifier Power: 30 W Signal-to-Noise Ratio: 100 dB typical A-weighted Input Connectors: 1 x XLR balanced input connector; 1 x TRS balanced/unbalanced input connector Polarity: Positive signal at + input produce outward LF cone displacement Input Impedance: 20 KO balanced, 10 KO unbalanced Input Sensitivity: 85 mV pink noise input produces 90 dBA output SPL at 1 meter with volume control at maximum Protection: RF interference, output current limiting, over temperature, turnon/off transient, subsonic filter, external mains fuse. Indicator: Power on/off indicator on rear panel Power Requirements: Factory-programmed for 115 V ~50/60 Hz, 230 V ~50/60 Hz, or 100 V ~50/60 Hz Cabinet: Vinyl-laminated high-acoustic-efficiency MDF Dimension (height x width x depth): 9.8" x 6.9" x 7.9", 250 mm x 176 mm x 200 mm Weight (without packing): 11 lbs., 5.0 kg
M-Audio P/N: BX5 Carbon
manufacturer-number: SV-2 - EIB KNX Power Supply SV-2 2500 mA / DC The output can be used as power supply for external devices - adjustable up to 29.5V, e.g. for binary inputs 24V DC or other devices (DC). In connection with a choke and a current limiter module each the power supply can be used to supply several EIB KNX lines (see SV-2/DR1 to DR4) Technical data: -Input: 85-264 VAC, 95-250 VDC (terminal 1=L, terminal 2=N) -Output: variable by means of potentiometer from 22.5 to 29.5 VDC -Preset: 24 VDC -Output current: max. 2500 mA -Ripple: max. 50 mV -Operating temperature: -25°C - +70°C -Protection: IP 20 -REG case for DIN rail, 4 TE EIB KNX Power Supply SV-2 2500 mA / DC The output can be used as power supply for external devices - adjustable up to 29.5V, e.g. for binary inputs 24V DC or other devices (DC). In connection with a choke and a current limiter module each the power supply can be used to supply several EIB KNX lines (see SV-2/DR1 to DR4) Technical data: -Input: 85-264 VAC, 95-250 VDC (terminal 1=L, terminal 2=N) -Output: variable by means of potentiometer from 22.5 to 29.5 VDC -Preset: 24 VDC -Output current: max. 2500 mA -Ripple: max. 50 mV -Operating temperature: -25°C - +70°C -Protection: IP 20 -REG case for DIN rail, 4 TE Manufacturer: Eibmarkt Item number.: N000601 Note:Delivery costs and discounts are displayed clearly in the cart (click on icon cart symbol) depending on the currently selected payment methods, mode of shipment and value of goods as well as country and address. - SV-2
EIBMARKT P/N: SV-2
Bernard Violin MV 050 1/16 BERNARD Violín VIOLIN MV 050 1/16. Violin de estudio, cordal con 4 microafinadores, arco, resina y estuche incluidos. Tapa de abeto sólido trasera y aros en arce, clavijas, barbada en madera resistente.
The Bunn CWTF-3 MV 2 Top 12 Cup Multi-Voltage Automatic Coffee Brewer with 3 Warmers features options you expect from automatic coffee brewer by Bunn Coffee Machines.
The ORP-200 measures oxidation reduction potential from -999 to +1000 mV with an accuracy of +/- 2 mV. Manufactured to the highest ISO-9001 standards, the fully replaceable sensor may make this the last ORP meter you ever buy. The large easy to read LCD includes simultaneous temperature readings, and the push button digital calibration makes operation a breeze.
HM Digital P/N: ORP-200
Wheels roll and steer.Made of die cast metal with some plastic parts.Approximate Dimensions L-7 H-4.25.
Maisto P/N: 11097r/s
Grade MC6025 - ISO P15 - P25 2-in-1 technology provides excellent heat and wear resistancewhich helps prevent crater wear. The smooth coating layer combined with microscopic TiCN coating ensures better surface finish and long, consistent tool life. Suitable for high speed and high efficiency machining. MC7025 - ISO M20 - M30 CVD coated grade for high efficiency turning of austenitic stainless steels. Excellent wear resistance in high speed cutting conditions. TiCN and micro grain Al2O3 coating delivers balanced wear and chipping resistance. Specially engineered carbide substrate provides excellent resistance to plastic deformation. Specifically designed for 300 series stainless steel applications. MP3025 - ISO P20 - P30 Coated cermet grade with improved wear resistance and significantly increased fracture resistance. For use with or without coolant and on interrupted cuts when finish machining steels, stainless steels and cast irons. Chipbreaker LM - Light cutting. Excellent burr control. Reduces the incidence of burrs drastically because the sharpness properties and cutting edge strength are optimised with different rake angles. Depth of cut: 0.7 - 2.0Feed rate: 0.10 - 0.40 SV - Light cutting of carbon steel, alloy, mild and stainless steel. Large rake angle provides sharp cutting action. A peninsular dot ensures chip control at depths of cut under 1mm. Depth of cut: 0.2 - 1.0Feed rate: 0.06 - 0.25 MM - Medium cutting. Excellent resistance to plastic deformation of insert corner as a result of obtaining the optimum land geometry by simulation analysis technology. Depth of cut: 1.5 - 3.5Feed rate: 0.15 - 0.30 MV - Medium cutting of carbon, alloy steel and stainless. A positive insert with a large rake angle achieves sharp cutting edge performance. Double breakers and round dots in the rake face achieve a wide range of chip discharge. Depth of cut: 0.3 - 2.0Feed rate: 0.08 - 0.30* General
5Pcs ACS712TELC-05B 5A Module Current Sensor Module For Arduino Description : The current sensor model : ACS712ELC 5v power supply, Onboard power light indicator Module can measure +5 or -5 current, corresponding to the analog output of 185 mv/A When no current thorough the test, the output voltage is the VCC/ 2 Size of the PCB board : 31 x13 (mm) (mm) Note: ACS712 is based on the detection principle of the hall, please try to avoid magnetic effect when using. Package included : 5 x ACS712ELC current sensor
Faux Alabaster Acrylic diffuser, (2) 6in and (2) 12 in. stems included. 120-277V electronic (MV) multi-volt ballast (13W CFQ lamps required)
AFX Lighting P/N: CRP418RBMV
SIMPLE ENOUGH FOR A CHILD POWERFUL ENOUGH FOR A DEVELOPER VERSATILE ENOUGH FOR ANY PLATFORM
Heavy-Duty Steering Shaft with Vibration Dampener Fits 1987 to 1995 YJ Wrangler;Factory or Flaming River column;Manual or power steering JEEP WRANGLER (YJ) BASE ISLANDER LAREDO RENEGADE RIO GRANDE S SAHARA SE SPORT 1987 1988 1989 1990 1991 1992 1993 1994 1995 2.5L (150) 4.2L (258) 4L Power Tech (242) GAS Flaming River Heavy-Duty Steering Shaft with Vibration Dampener FR1519-87P/MV Steering Shaft
Flaming River P/N: FR1519-87P/MV
The Beneath the Surface IKESA Strobe Adapter for Ikelite Strobes is designed for use with Ikelite #DS-125 DS-160 50 MS MV DS-50 DS-51 and 161 Strobes. This adapter is made from high quality aluminum and has a hard anodized black ball 1 inches (25.4 mm) in diameter with the EPDM O-ring.
Beneath the Surface P/N: IKESA
MV4 Premium Multi Purpose Vacs are a must-have for DIY enthusiasts, they're powerful and efficient, and make light work of everything from rubble and sawdust to sludge and spills. Our DIY Multi Purpose Vac has been engineered with practicality in mind, from the compact size and shape to the ingenious storage and time saving accessories. 1600w powered motor and uses only 1100w energy. Ergonomic carry handle for easy transportation. Space saving on board accessory storage. Specially designed cartridge filter enables liquid and dry pick up without changing the filter. Suitable for hard floors. 2.2m hose. 4m power cord. 20 litre wet capacity. 20 litre dry capacity. Total capacity 20 litres. Weight 7.6kg. Cord storage. Disposable bags included. Includes wet and dry floor tool, crevice tool, extension tube, suction tube with handle, filter bag, cartridge filter. Manufacturer's 2 year guarantee. EAN: 4039784916463.
Karcher P/N: 3775796
Home London time: 2016-09-25 17:20:05