Traditional V-Belts are manufactured with cross-sections Z, A, B, C and D where the letter designates its cross-section and the number corresponds to a nominal internal length in inches and to DIN standard e.g. 13x1320 Li, where the first number denotes the width in mm, and the second number is the internal length in mm. Dunlop V-belts have specially treated jackets to give superior anti-static, heat and oil-resistant properties and are static conductive to ISO1813.A Section
manufacturer-number: AE/A2.1 - 2-channel Analogue input AE/A 2.1 for a fast and easy recording of analogue input signals. Sensores can be connected easily and fast because of the innovational case. The analogue input AE/A 2.1 offers different ways to connect different sensors like the PT 1000, PT 100 as well as sensors with 1-10V, 0-1 V, 0-5 V, 0-10 V, 0-20 mA, 4-20 mA, 0-1000 Ohm, potential-free contacts and may more. Please note that an additional auxiliary supply is needed for all active sensors. The analogue input has a protection class of 54IP. The Analogue InputAE/A 2.1 assist in controlling systems via the ABB i-bus® (21-32V DC), max. powe iput of 8 mA, max. power loss of 250 mW. protection class II, max power lengh of 30m. The analogue input includes a bus connection. photographed by EIB3D.COM Analogue Input, 2fold, SM The convenient control of complex systems is gaining increasing importance.Sensors are used for example in &, &, – order to control inlet and outlet air dampers as well as air flow rates of an &, &, &, & air-conditioning system &, &, – the heating to regulate via an outside temperature sensor &, &, – the liquid levels of tanks query &, &, – ducting temperatures to recorde and evaluate &, &, – to install presence sensors to make optimum use of energy in the rooms. Monitoring and security functions are dependent on data from the sensors. All these events contribute to controlling complex systems in buildings and houses in an energyefficient, convenient and reliable way. With the ability to record and process independent analogue input signals, the Analogue InputAE/A 2.1 assist in controlling systems via the ABB i-bus®. Technical data Power supply: via ABB i-bus KNX (21…32 V DC) Current consumption: 8 mA max. Power loss: 250 mW max. Sensor inputs: 2 Line length: 30m max. between the sensor and the device input Plug-in screw terminals, green: &, &, – 0.08.1, 5 mm rigid or flexible &, &, – 0.2.1, 0 mm flexible with wire end sleeve without/with plastic insulating &, &, &, & sleeve Multiwire connection (2 wires with the same cross-section): &, &, – 0.08.0, 5 mm rigid, &, &, – 0.08.0, 75 mm flexible, &, &, – 0.25.0, 34 mm flexible with wire end sleeve without plastic insulating sleeve &, &, – 0, 5 mm flexible with twin wire end sleeve with plastic insulating &, &, &, & sleeve Stripping length: 7 mm Screw thread: M2 Tightening torque: 0, 25 Nm max. Line entry: 4 pcs., individually Installation screw fastening: Surface-mounting device, Housing / colour: Plastic, gray, free from halogens Dimensions (H x W x D): 117 x 117 x 51 mm Weight: 0, 25 kg Temperature range for: &, &, – Operation -20°C . +70°C &, &, – Storage -25°C . +70°C &, &, – Transport -25°C . +70°C Type of protection: IP54 in accordance with EN 60 529 Safety class: II, DIN EN 61 140 compliant Norm B: 223/108/03441 Overvoltage class: III, DIN EN 60 664-1 compliant Pollution class: 2, DIN EN 60 664-1 compliant Certifi cation: KNX in accordance with EN 50 090-1, -2 certifi cate Manufacturer: ABB Reference no.: AE/A2.1 Note:Delivery costs and discounts are displayed clearly in the cart (click on icon cart symbol) depending on the currently selected payment methods, mode of shipment and value of goods as well as country and address.
ABB Stotz S&J P/N: AE/A 2.1
A new 35mm high profile that makes the new Scirocco 35 range unique. Aerodynamic and yet easy to handle, responsive and light, but with all the advantages of a standard tyre wheel with aluminium braking surface. Suitable for all routes, the new Scirocco satisfies the demands of amateurs and great long-distance riders as well as cyclists with a pronounced racing spirit. State of the art technology and great performance from the very first kilometre. The new Scirocco H35 mm will be also available in the Cyclocross version. TECHNICAL SPECIFICATIONSRIM:35 mm profile for a standard tyre: translates into good penetration while being extremely easy to handle even in a cross wind. Dynamic Balance™: every point of the rim is counter-balanced by an equal weight on the opposite side. Maximum stability of the wheel even at high speeds. SPOKES:spokes with aerodynamic profile: provides the maximum aerodynamic penetration. Reduces aerodynamic drag saving rider energy. Spokes anti-rotation system: allows the spokes to maintain the best aerodynamic position.front: 18 aero spokes, radially laced in stainless steel with variable cross-section.rear: 21 aero spokes in stainless steel with variable cross-section, doubled on the drive sideexclusive MEGA G3™ spoke pattern: perfect balance of the spoke tensions on both sides of the wheel. Reduces stress, increases transversal rigidity and the transmission of power to the wheel. MEGA G3™ eliminates vibrations even with heavy cyclists. HUB:Aluminium hub: high side stiffness yet with low weight. Aluminium nipples: reduce the peripheral weight of the wheel. Oversize flange MEGA G3 cassette side: increases torsional stiffness, greater reactivity with each change in the cyclist's pace Aluminium pin: reduces wheel weight Additional seal: keeps the bearings/balls zone clean and smooth running, maintaining performance over time. (Scirocco H35 mm CX version) Weight:front wheel: 788 grear wheel: 937 g
Campagnolo P/N: WH13-SCCFRB
This new volume contains fourteen national reports and a General Report on the use of comparative law by courts, which were presented at the XIVth International Congress of Comparative Law in Athens. It provides a general survey of the frequency and methods of a comparative recourse to foreign law by courts, describing both the methods of such recourse and the typical fields in which it is undertaken. The reports offer an interesting cross-section of contemporary court practice from a wide variety of countries around the world large and small, unitary and federal, and with differing historical backgrounds. All demonstrate the needs of national courts to look to foreign law for inspiration or as a model for dealing with new, unsettled iss
Wolters Kluwer Law & Business
Poison Spyder Bombshell Diff Covers are designed to protect your gears, lockers and diff cover bolts from the most punishing rocks and trail hazards. The stock covers your Jeep came with are weak, stamped sheetmetal. Even a moderate tap with a rock can cave it in against your ring gear, causing potential damage to the gears, locker and carrier bearings, not to mention a difficult, messy trail fix. Even more common, through less catastrophic, is peel back that can occur when sliding over a rock causes the lip of the cover to peel up, allowing your gear oil to drain causing a hazard for both your Jeep and the environment. The Bombshell Diff Cover is your best insurance against each of these hazards. The Bombshell differential cover is cast from highly ductile nodular iron?the same material drag racing differential housings are cast from to handle thousands of horsepower. The design of the Bombshell incorporates recesses to protect the diff cover bolt heads from trail damage, while the profile of the Bombshell acts as a ramp to help slide your Jeep up and over the most troublesome pumpkin-eaters. The ramp profile also results in an extremely thick & up to 1 thick?cross-section around the bolt ring, where contact with the rocks is most likely. Throughout the rest of its cross-section the Bombshell is the thickest cast differential cover on the market, from 7/16 to a brutal 1/2 thick at the outermost surface. Dana 30;Cast ductile nodular iron;Bare steel;Thickest cast differential cover
Poison Spyder Customs P/N: 42-10-030
The durable and long-lasting Linex Triangular Scale has a different scale on each edge to provide accurate measurements Use this triangular scale to take accurate measurements. The 3-lobed cross-section division features 6 types of scales that offer clear and accurate measurements at all times. Made of good-quality material, it ensures long-lasting usage. It is ideal for field draughtsmen, illustrators, archaeologists and other professionals Triangular scale. Designed with 3-lobed cross-section. Plastic construction. Durable and long lasting. Graduation: 1:100:200:250:300:400:500 Length: 30 cm.
FEATURES of the Yakima FullTilt 4 Bike Hitch Carrier Fully assembled out of the box Tool-free installation with locking SpeedKnob Fully padded arms for the ultimate in bike protection UpperHand lever tilts rack down for vehicle access and folds it flat for easy storage Arms fold down when not in use Zero-hassle ZipStrips quickly secure bike to rack SKS Locks included; locks rack and bike mounts Fits both 1.25 in. and 2 in. receiver Carries up to 4 bikes Max 40 lbs per bike with a total max of 150 lbs Padded arms and hassle-free ZipStrips for fast loading Comes with full look package Cross-section mast and a spine-shaped curvature - prevent the bike and vehicle from making contact Tilts away for rear-of-vehicle access Trigger Finger technology folds the arm down with the press of a button Tongue folds for flat easier storage Auto Pin hitch pin automatically engages when inserting the mast into the hitch Includes a full SKS lock package - which locks the bikes to the rack and the rack to the vehicle ZipStrips - replace rubber straps and ratchet into place and the rack arms are fully-padded All controls are on top of the unit so there is no need to bend down to use
Yakima P/N: 8002462
Priding itself as the Philippines' best fashion magazine, MEGA is the thinking woman's cross-section of the what's what of style, beauty and lifestyle. With well-curated sections of tailor-made stories from trends to try out now, comprehensive style guides, beauty hacks to learn from and in-depth features, MEGA guarantees to elevate and bring out the very best in you. Allow us to whisk you away in worlds of fantasy through well-produced fashion and beauty editorials that aim to inspire and aspire to as well.
Imitation Leather Cord, Black Size: about 10mm wide, 1.5mm thick, 1m/strand. A smooth cross-section that is perfect for many beading needs. Good for chunky beadwork and pendants. So Supple it is that adds a natural softness to jewelry and clothing designs.
Premium AV cover with banana and spade lug connection in solid and gold-plated design. Connection for speaker cable with a cross-section of up to 6.0 mm².
Inakustik P/N: 00980107026
Heavy-duty every inch of the way - cross-section pads stand up to the toughest use environments. Non-repro blue rulings (ruled both sides). Glue top construction for easy sheet removal. Pad Type: Quadrille; Sheet Size: 8 1/2" x 11"; Ruling: Quadrille (4 sq./in.); Number of Sheets per Pad: 50.
TOPS BUSINESS FORMS P/N: TOP35041
Material: PU. Style: European and American style. Processing methods: soft surface. Openings way: zipper. Pattern: Plaid. Lining texture: Polyester. Popular elements; car suture. Bag shapes: square cross-section. Internal structure: zipper pocket. Color: black, beige.Dimensions: Length 33cm * height 23cm * 10cm thick
Shank diameter: 1/4 in Used with: 1L, 2L, 4L arbor Added durability: hardened carbon steel for strength thorough the cross-section
Be prepared for a range of jobs in and around your home thanks to this Makita Super Express Jigsaw Blade Set. It includes a B50 for cutting wood, B51 for cutting metal and B52 blade for both wood or metal cutting. These Makita Jigsaw Blades give you superior cutting performance and less vibration. The progressive tooth configuration and thin cross-section gives you fast cutting of thick and thin materials. 3 piece makita jigsaw blade pack for cutting wood and metal. Includes: 3 piece Makita jigsaw blade pack for cutting wood and metal. Size H17, W5.5, D2cm. Weight 0.02kg. (excludes professional use).
Makita P/N: 5419184
Home London time: 2017-04-23 21:43:00