Binet Catalogue

Need more space? Is your new hard disk burning up in your old enclosure? Try the brand new Rosewill RX-358-S! Designed for extra ventilation and enhanced cooling for years of use, it has an 80mm side fan. Air is brought in through the side and directed out the rear, for direct cooling of your drive. You don't have to worry about overheating your hard disk anymore. Using either USB or eSATA cable, an extra 3.5" SATA hard drive (up to 1.5 TB) can connect to your PC without opening the case. The RX-358-S is hot swappable, so it can be connected or moved without shutting down the computer. With your eSATA connection, you can see transport speeds up to 3Gb/s! Speed your transfers and lengthen your drive's life with Rosewill! Material: Full Aluminum Cover, metal tray Internal Interface: SATA I/II AC Adapter: 100-240 VAC(47Hz~63Hz), 12V/2A output Fan: 1 x 80mm cooling fan (Internal Tray) Dimensions: (LxWxH) 7.59" x 4.92" x 1.77" Specifications: Support up to 1.5TB HDD Power On/Off for internal cooling fan USB Supports Win 2000/ME/XP/VISTA, and Mac OS 9.x/10.x and above, Linux kernel after 2.4.1.0 Power Adapter, 100-240 VAC(47Hz~63Hz), 12V/2A output Please NOTE: In order to enable HOT-SWAP function, please check to make sure the motherboard supports HOT-SWAP function. Otherwise, the hot swappable Package Contents: External Enclosure AC power adapter eSATA Cable eSATA Bracket USB Cable Screws Parts: 1 year limited

GWC Vista ReadyBoost Compatible Card Reader This USB 2.0 Single Slot Card Reader is a portable device that supports reading and writing Secure Digital™ Card (SD) and MultiMedia™ Card (MMC) series memory cards. It's Plug-and-Play; just plug it into a free USB port on your computer and it's ready to use. Another benefit is that it supports the new generation high-speed and high-capacity memory cards, e.g, SD version 2.0 and MMC version 4.2, ensuring you get the high performance brought by these memory cards. What's best, the card reader supports Windows® ReadyBoost™, a feature allowing you to use a memory card to increase the available memory for Windows Vista™. You can use part of a card to enhance system performance and at the same time use the remaining part as a storage media, letting you get the most out of one memory card. Features Supports SD and MMC series memory cards Supports Windows® ReadyBoost™ to enhance system performance (needs ReadyBoost capable memory card, not provided) Supports high-speed and high-capacity memory cards, e.g. SDHC Class 6, MMC 4.2 High performance, SD reading speed up to 20MB/s Supports USB 2.0 transfer rate of up to 480 Mbps Supports hot-plugging & Plug-and-Play No additional driver installation required Socket : One SD/MMC socket Certification : CE, FCC System Requirements IBM compatible Pentium-233 MHz or faster PC & Mac with USB port Windows® ME, 2000, XP, Vista; Mac OS 9.x /10.x Package Contents USB 2.0 Single Slot Card Reader ×1 User's Manual ×1 USB Cable (Optional) ×1 **Note The ReadyBoost function can be used as long as the non-volatile memory (memory card) being used meets the following requirements, The capacity of the removable media must be at least 256 MB The device should have an access time of 1 ms or less The device must be capable of 2.5 MB/s read speeds for 4 KB random reads spread uniformly across the entire device and 1.75 MB/s write speeds for 512 KB random writes spread uniformly across the device The device must have at least 235 MB of free space The recommended amount of flash memory to use for Windows ReadyBoost acceleration is one to three times the amount of random access memory (RAM) installed in your computer The GWC Vista ReadyBoost Compatible Card Reader supports SD and MMC series memory cards. SD specification v1.0/1.1/2.0: SD, mini SD, Micro SD, T-Flash MMC specification v 3.x/ v 4.0/ v.4.2: MMC, HS-MMC, MMC Plus, RS MMC, MMC Micro, MMC Mobile The ReadyBoost function works with 512 MB or 1GB cards as long as the read/ write speed meets the requirement, although a SDHC (Secure Digital High Capacity) Memory Card is suggested.

FeaturesThe USB reader/writer, MAUSB-10, is a perfect solution for high speed data transfer of large files to a computer. Equipped with a dual slot it is able to read and write images both on 3.3V SmartMedia cards (with capacities from 4MB - 128MB) as well as the new xD-Picture Cards (with capacities from 16MB - 1GB). Both Windows (98/Me/2000/XP) and Macintosh (OS 8.6/9.x/X) operating systems are supported and USB (USB 1.1) compatibility further ensures enhanced convenience and flexibility.CompatibilityPlug and Play Operating System: Windows 98 Windows Me Windows 2000 Windows XP Mac OS 8.6 Mac OS 9.x Mac OS X 10.x

Bytecc T-100 Hard Drive Docking Station / Adapter The USB 2.0 to SATA HDD / SSD Docking Station Adapter converts 2.5" / 3.5" internal SATA hard drives into a convenient external drive Easily transfer files from your computer or notebook, back up files, or store large file archives. Supports SATA (Serial ATA) Hard Drives - Up to 1TB (1000GB) Supports both SATA Solid Stated Hard Drive (SSD) and Hard Drive Disk (HDD) Feature with One-Touch Button for back up files (OTB) Single Bay - Fits Both 3.5-inch and 2.5-inch SATA Hard Drives (spacer included) Complies with USB 2.0 High Speed standards (USB 1.1 backward compatible) Transfer rate: Up to 480 Mbps Plug and Play Package Contains: Bytecc T-100 Hard Drive Docking Station / Adapter USB 2.0 Cable Power Adapter with Power Cord User Manual CD Driver Color: White PC or Mac Compatible - Microsoft Windows 2000 / XP / Vista, Linux, Mac OS 10.x or Higher Brand: Bytecc Model: T-100